Category Archives: Uncategorized

China supplier China CHINAMFG Factory Price Intelligent PLC Control High Quality Professional Electric Motor Powered Direct Screw Air Compressor with ISO and CE Certification arb air compressor

Product Description

BEEST—-AIR COMPRESSOR&SOLUTION

Moair Energy Conservation Durable Two Stage Screw Air Compressor with Double Permanent Magnet Motor

1. Company background

ZheJiang CHINAMFG International Trade Co., Ltd. is the senior partner of HangZhou CHINAMFG Compressor Co., Ltd , we are committed to the sales and after-sales service of air compressors in Southeast Asia, and have stores in Indonesia.
We are the professional manufacturer of the air compressor products of various types including the permanent-magnet synchronous variable-frequency series,permanent-magnet synchronous low-pressure series,permanent-magnet sunchronous two-stage compressors series,etc.
More than 10 years of professional screw compressors manufacturing technology,bringing the international first-class permanent magnet synchronous drive and control technologies.

2. Product introduction

Equipped with an IE3 motor, the direct drive rotary screw air compressor consists of a high-accuracy screw and high-quality casting, with a wide variable range of parameters.

3.Core components

Motor 

  • More stable: no mechanical transmission troubles
    There is no gear shaft in the air compressor and the effective permanent magnet motor and the male rotor are directly connected on 1 shaft without gear drive, which can eliminate pitting of gear or hidden troubles of tooth fracture.
    Without shaft coupling, 2 integrated PM motors directly drive 2 airends of the air compressor, avoiding the hidden troubles of shaft coupling failure.
  • More energy-savings: the airend is always in a smooth running state
    The 2 stage 3 phase permanent magnet rotary gear screw air compressor of CHINAMFG is powered by 2 independent PM motors and 2 independent inverters, which is intelligently controlled such as keep the airend running at a best level-pressure point by controlling discharge pressure and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of air compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
  • More effective: high-efficiency permanent magnet motor and no gear drive loss.
    With a motor of a high protection degree of IP54, it is more energy-saving and it can stay effective at low frequency and low speed.
  • More environment-friendly operation with lower noise
    No noise of motor bearings, gear meshing and coupling transmission.
  • More structure-compact
    The volume of PM motor is small and the structure is compact, which can save much space.

    4.Parameters

    5.Principle of energy-saving
     

    • Change the traditional induction motor with high-efficiency technology of permanent magnet rotary screw motor, thus reducing the consumption in transmission.
    • Powered by 2 independent PM motors and 2 independent inverters, the compressor is intelligently controlled such as keep the airend running at a best level-pressure point by controlling pressure of air flow and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
    • Because the gear ratio is fixed, point efficiency is emphasized in this case. That is to say, only with fixed rotary speed and rated pressure did it have the best specific power. When running in a state of variable speed and variable frequency, considering the fixed speed of gear, interstage pressure will not reach the best one. Rotational speed declining while energy consumption not declining at the same time, it is not suitable for running in variable speed and variable frequency state.

       

    After-sales Service: Online Service
    Warranty: One Year
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Vertical

    air compressor

    What is the impact of humidity on compressed air quality?

    Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

    1. Corrosion:

    High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

    2. Contaminant Carryover:

    Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

    3. Decreased Efficiency of Pneumatic Systems:

    Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

    4. Product Contamination:

    In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

    5. Increased Maintenance Requirements:

    Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

    6. Adverse Effects on Instrumentation:

    Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

    To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

    air compressor

    Are there differences between single-stage and two-stage air compressors?

    Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

    Compression Stages:

    The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

    Compression Process:

    In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

    Pressure Output:

    The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

    Efficiency:

    Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

    Intercooling:

    Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

    Applications:

    The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

    It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

    In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

    air compressor

    What are the key components of an air compressor system?

    An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

    1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

    2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

    3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

    4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

    5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

    6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

    7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

    8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

    9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

    10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

    These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

    China supplier China CHINAMFG Factory Price Intelligent PLC Control High Quality Professional Electric Motor Powered Direct Screw Air Compressor with ISO and CE Certification arb air compressorChina supplier China CHINAMFG Factory Price Intelligent PLC Control High Quality Professional Electric Motor Powered Direct Screw Air Compressor with ISO and CE Certification arb air compressor
    editor by CX 2023-10-20

    China Best Sales 100 CHINAMFG 7bar Energy Saving Dry Oil Free \Oilless Screw Air Compressor mini air compressor

    Product Description

    Industrial Silent/Mute Medical Dry Oil Free Oilless Direct Drive Rotary Double Screw Type Air Compressor Advantages

    1.Clean air 100% oil-free, class 0 oil free air according to ISO8537-1  
     
    2.Adopt GHH air end made in Germany
     
    3.Technology patent used in oil free compressed air system
     
    4.Significant energy saving, environmental-friendly and pollution-free
     
    5.Low operation and maintenance cost
     
    6.Powerful MAM microcomputer controller and touch screen
     
    7.Designed especially for medical, pharmacy, instrument, coating, chemical industry and food processing, etc. 

    DENAIR Dry Type Oil Free Screw Air Compressor In Hannover Messe 2017
     

    DENAIR Class 0 Certification

    Comparison between dry oil free compressor and lubricated screw air compressor

    Dry Type Oil-free Air Compressor Technical Parameters

    Model Maximum working pressure Capacity(FAD)* Installed
    motor
    power    		 Cooling Method Noise Level** Dimensions
    (mm)    		 Weight Air  Outlet Pipe Diameter
    50 Hz 60 Hz
    bar(e) psig m³/min cfm m³/min cfm kW hp dB(A) L W H kG
    DWW-55 7 102 9.35 330 8.06 285 55 75 Air Cooling W-water Cooling 74 2000 1200 1650 1900 G1-1/2″
    8 116 9.17 324 8.04 284 55 75 74 2000 1200 1650 1900 G1-1/2″
    10 145 8.11 286 7.05 249 55 75 74 2000 1200 1650 1900 G1-1/2″
    DWW-55W 7 102 9.35 330 8.06 285 55 75 74 2000 1200 1650 1800 G1-1/2″
    8 116 9.17 324 8.04 284 55 75 74 2000 1200 1650 1800 G1-1/2″
    10 145 8.11 286 7.05 249 55 75 74 2000 1200 1650 1800 G1-1/2″
    DWW-75 7 102 12.71 449 11.56 408 75 100 74 2000 1200 1650 2100 DN50
    8 116 11.78 416 11.53 407 75 100 74 2000 1200 1650 2100 DN50
    10 145 11.57 409 10.11 357 75 100 74 2000 1200 1650 2100 DN50
    DWW-75W 7 102 12.71 449 11.56 408 75 100 74 2000 1200 1650 2000 DN50
    8 116 11.78 416 11.53 407 75 100 74 2000 1200 1650 2000 DN50
    10 145 11.57 409 10.11 357 75 100 74 2000 1200 1650 2000 DN50
    DWW-90 7 102 14.6 515 13.61 480 90 120 76 2800 1800 1860 2800 DN50
    8 116 14.32 506 13.47 476 90 120 76 2800 1800 1860 2800 DN50
    10 145 13.55 478 12.5 441 90 120 76 2800 1800 1860 2800 DN50
    DWW-90W 7 102 14.6 515 13.61 480 90 120 76 2800 1800 1860 2180 DN50
    8 116 14.32 506 13.47 476 90 120 76 2800 1800 1860 2180 DN50
    10 145 13.55 478 12.5 441 90 120 76 2800 1800 1860 2180 DN50
    DWW-110 7 102 20.27 716 N/A*** N/A*** 110 150 78 2800 1800 1860 3200 DN65
    8 116 19.03 672 N/A*** N/A*** 110 150 78 2800 1800 1860 3200 DN65
    10 145 16.65 588 15.57 550 110 150 78 2800 1800 1860 3200 DN65
    DWW-110W 7 102 20.27 716 N/A*** N/A*** 110 150 78 2800 1800 1860 3050 DN65
    8 116 19.03 672 N/A*** N/A*** 110 150 78 2800 1800 1860 3050 DN65
    10 145 16.65 588 15.57 550 110 150 78 2800 1800 1860 3050 DN65
    DWW-132 7 102 23.94 845 20.09 709 132 175 78 2800 1800 1860 3340 DN65
    8 116 22.47 793 19.87 702 132 175 78 2800 1800 1860 3340 DN65
    10 145 20.19 713 N/A*** N/A*** 132 175 78 2800 1800 1860 3340 DN65
    DWW-132W 7 102 23.94 845 20.48 723 132 175 78 2800 1800 1860 3170 DN65
    8 116 22.47 793 20.26 715 132 175 78 2800 1800 1860 3170 DN65
    10 145 20.19 713 19.82 700 132 175 78 2800 1800 1860 3170 DN65
    DWW-160 7 102 27.26 962 25.47 899 160 215 78 2800 1800 1860 3700 DN65
    8 116 25.86 913 25.17 889 160 215 78 2800 1800 1860 3700 DN65
    10 145 23.87 843 23.18 819 160 215 78 2800 1800 1860 3700 DN65
    DWW-160W 7 102 27.26 962 25.47 899 160 215 78 2800 1800 1860 3300 DN65
    8 116 25.86 913 25.17 889 160 215 78 2800 1800 1860 3300 DN65
    10 145 23.87 843 23.8 819 160 215 78 2800 1800 1860 3300 DN65
    DWW-185 7 102 30.19 1066 28.88 1571 185 250 78 2800 1800 1860 3900 DN65
    8 116 29.53 1043 28.3 999 185 250 78 2800 1800 1860 3900 DN65
    10 145 27.2 960 27.17 960 185 250 78 2800 1800 1860 3900 DN65
    DWW-185W 7 102 30.19 1066 28.88 1571 185 250 78 2800 1800 1860 3460 DN65
    8 116 29.53 1043 28.3 999 185 250 78 2800 1800 1860 3460 DN65
    10 145 27.2 960 27.17 960 185 250 78 2800 1800 1860 3460 DN65
    DWW-200W 7 102 36.41 1286 31.14 1100 200 270 78 3100 2150 2200 4300 DN100
    8 116 33.86 1196 30.52 1078 200 270 78 3100 2150 2200 4300 DN100
    10 145 30.35 1071 28.82 1018 200 270 78 3100 2150 2200 4300 DN100
    DWW-220W 7 102 38.99 1377 37.54 1325 220 300 78 3100 2150 2200 4500 DN100
    8 116 37.93 1339 36.78 1299 220 300 78 3100 2150 2200 4500 DN100
    10 145 33.79 1193 31.08 1097 220 300 78 3100 2150 2200 4500 DN100
    DWW-250W 7 102 47.26 1669 41.53 1466 250 350 78 3100 2150 2200 4550 DN100
    8 116 43.31 1529 40.69 1437 250 350 78 3100 2150 2200 4550 DN100
    10 145 38.88 1373 37.43 1322 250 350 78 3100 2150 2200 4550 DN100
    DWW-280W 7 102 51.04 1802 N/A*** N/A*** 280 375 80 3400 2400 2200 4800 DN100
    8 116 47.24 1668 N/A*** N/A*** 280 375 80 3400 2400 2200 4800 DN100
    10 145 43.26 1528 41.4 1462 280 375 80 3400 2400 2200 4800 DN100
    DWW-315W 7 102 52.03 1837 N/A*** N/A*** 315 425 80 3400 2400 2200 5000 DN100
    8 116 51.04 1802 N/A*** N/A*** 315 425 80 3400 2400 2200 5000 DN100
    10 145 47.18 1666 N/A*** N/A*** 315 425 80 3400 2400 2200 5000 DN100

    Low Pressure Dry Type Oil-free Air Compressor Technical Parameters

    Model Maximum working pressure Capacity(FAD)* Installed
    motor
    power    		 Cooling Method Noise Level** Dimensions
    (mm)    		 Weight Air
    Outlet Pipe Diameter
    50 Hz 60 Hz
    bar(e) psig m³/min cfm m³/min cfm kW hp dB(A) L W H kG
    DWL-55-2 2.5 37 15.33 541 14.4 508 55 75 Air Cooling W-water Cooling 69 2100 1500 1790 2500 DN100
    DWL-55-3 3.5 51 12.78 451 10.85 383 55 75 69 2100 1500 1790 2500 DN100
    DWL-75-2 2.5 37 19.92 703 19.85 701 75 100 69 2100 1500 1790 2650 DN100
    DWL-75-3 3.5 51 16.3 575 15.86 560 75 100 69 2100 1500 1790 2650 DN100
    DWL-90-2 2.5 37 26.07 921 26.28 928 90 120 72 2800 1800 1860 2750 DN100
    DWL-90-3 3.5 51 19.54 690 18.3 646 90 120 72 2100 1500 1790 2750 DN100
    DWL-110(W)-2 2.5 37 33.16 1171 29.82 1053 110 150 72 3100 2150 2200 3500 DN150
    DWL-110(W)-3 3.5 51 25.6 904 23.9 884 110 150 72 2800 1800 1860 3000 DN150
    DWL-132(W)-2 2.5 37 40.24 1421 36.99 1271 132 175 72 3100 2150 2200 3600 DN150
    DWL-132(W)-3 3.5 51 27.23 961 29.43 1039 132 175 72 2800 1800 1860 3100 DN150
    DWL-160(W)-2 2.5 37 49.42 1745 45.2 1596 160 215 76 3100 2150 2200 3900 DN150
    DWL-160(W)-3 3.5 51 35.75 1262 35.12 1240 160 215 76 3100 2150 2200 3800 DN150
    DWL-185(W)-2 2.5 37 56.02 1989 52.71 1861 185 250 79 3400 2400 2200 4100 DN150
    DWL-185(W)-3 3.5 51 42.21 1490 40.28 1422 185 250 79 3400 2400 2200 4000 DN150

    *) FAD in accordance with ISO 1217 : 2009, Annex C: Absolute intake pressure 1 bar (a), cooling and air intake temperature 20 °C
    **) Noise level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance: ± 3 dB(A)
    ***) TBD-To Be Discussed
    ****) W-Water cooling

    DENAIR Factory

    Why Choose DENAIR ?
    1.Original Germany AERZEN/DENAIR air end,larger air delivery,lower noise.

    2. Oil free screw air compressor Pass CE, ISO9001 Quality Certification

    3. One of 3 biggest air compressor manufacturer in China

    4. Complete before-on-after sales service

    5. Immediate reply or solution by email or call
    6.Special oil gas separator with patents

    7.High efficiency motor, up to 96%

    FAQ

    Q1: Are you factory or trade company?  
    A1: We are factory.

    Q2: What the exactly address of your factory? 
    A2:  Our company is located in No. 6767, Tingfeng Rd. Xihu (West Lake) Dis.n District, ZheJiang  201502, China
    And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

    Q3: Warranty terms of your machine? 
    A3: Two years warranty for the machine and technical support according to your needs.

    Q4: Will you provide some spare parts of the machines? 
    A4: Yes, of course.

    Q5: How long will you take to arrange production? 
    A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

    Q6: Can you accept OEM orders? 
    A6: Yes, with professional design team, OEM orders are highly welcome

    Lubrication Style: Oil-free
    Cooling System: Air Cooling and Water Cooling
    Power Source: AC Power
    Cylinder Position: Vertical
    Structure Type: Closed Type
    Installation Type: Stationary Type
    Customization:
    Available

    |

    air compressor

    What are the differences between stationary and portable air compressors?

    Stationary and portable air compressors are two common types of air compressors with distinct features and applications. Here are the key differences between them:

    1. Mobility:

    The primary difference between stationary and portable air compressors is their mobility. Stationary air compressors are designed to be permanently installed in a fixed location, such as a workshop or a factory. They are typically larger, heavier, and not easily movable. On the other hand, portable air compressors are smaller, lighter, and equipped with handles or wheels for easy transportation. They can be moved from one location to another, making them suitable for jobsites, construction sites, and other mobile applications.

    2. Power Source:

    Another difference lies in the power source used by stationary and portable air compressors. Stationary compressors are usually powered by electricity, as they are designed for continuous operation in a fixed location with access to power outlets. They are connected to the electrical grid or have dedicated wiring. In contrast, portable compressors are available in various power options, including electric, gasoline, and diesel engines. This versatility allows them to operate in remote areas or sites without readily available electricity.

    3. Tank Capacity:

    Tank capacity is also a distinguishing factor between stationary and portable air compressors. Stationary compressors often have larger storage tanks to store compressed air for extended periods. The larger tanks enable them to deliver a continuous and steady supply of compressed air for longer durations without the need for frequent cycling. Portable compressors, due to their compact size and portability, generally have smaller tank capacities, which may be sufficient for intermittent or smaller-scale applications.

    4. Performance and Output:

    The performance and output capabilities of stationary and portable air compressors can vary. Stationary compressors are typically designed for high-volume applications that require a consistent and continuous supply of compressed air. They often have higher horsepower ratings, larger motor sizes, and higher air delivery capacities. Portable compressors, while generally offering lower horsepower and air delivery compared to their stationary counterparts, are still capable of delivering sufficient air for a range of applications, including pneumatic tools, inflation tasks, and light-duty air-powered equipment.

    5. Noise Level:

    Noise level is an important consideration when comparing stationary and portable air compressors. Stationary compressors, being larger and built for industrial or commercial settings, are often equipped with noise-reducing features such as sound insulation and vibration dampening. They are designed to operate at lower noise levels, which is crucial for maintaining a comfortable working environment. Portable compressors, while efforts are made to reduce noise, may produce higher noise levels due to their compact size and portability.

    6. Price and Cost:

    Stationary and portable air compressors also differ in terms of price and cost. Stationary compressors are generally more expensive due to their larger size, higher power output, and industrial-grade construction. They often require professional installation and may involve additional costs such as electrical wiring and system setup. Portable compressors, being smaller and more versatile, tend to have a lower upfront cost. They are suitable for individual users, contractors, and small businesses with budget constraints or flexible air supply needs.

    When selecting between stationary and portable air compressors, it is essential to consider the specific requirements of the intended application, such as mobility, power source availability, air demands, and noise considerations. Understanding these differences will help in choosing the appropriate type of air compressor for the intended use.

    air compressor

    What safety precautions should be taken when working with compressed air?

    Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

    1. Personal Protective Equipment (PPE):

    Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

    2. Compressed Air Storage:

    Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

    3. Pressure Regulation:

    Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

    4. Air Hose Inspection:

    Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

    5. Air Blowguns:

    Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

    6. Air Tool Safety:

    Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

    7. Air Compressor Maintenance:

    Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

    8. Training and Education:

    Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

    9. Lockout/Tagout:

    When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

    10. Proper Ventilation:

    Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

    By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

    air compressor

    What is the purpose of an air compressor?

    An air compressor serves the purpose of converting power, typically from an electric motor or an engine, into potential energy stored in compressed air. It achieves this by compressing and pressurizing air, which can then be used for various applications. Here’s a detailed explanation of the purpose of an air compressor:

    1. Powering Pneumatic Tools: One of the primary uses of an air compressor is to power pneumatic tools. Compressed air can be used to operate a wide range of tools, such as impact wrenches, nail guns, paint sprayers, sanders, and drills. The compressed air provides the necessary force and energy to drive these tools, making them efficient and versatile.

    2. Supplying Clean and Dry Air: Air compressors are often used to supply clean and dry compressed air for various industrial processes. Many manufacturing and production operations require a reliable source of compressed air that is free from moisture, oil, and other contaminants. Air compressors equipped with appropriate filters and dryers can deliver high-quality compressed air for applications such as instrumentation, control systems, and pneumatic machinery.

    3. Inflating Tires and Sports Equipment: Air compressors are commonly used for inflating tires, whether it’s for vehicles, bicycles, or sports equipment. They provide a convenient and efficient method for quickly filling tires with the required pressure. Air compressors are also used for inflating sports balls, inflatable toys, and other similar items.

    4. Operating HVAC Systems: Air compressors play a crucial role in the operation of heating, ventilation, and air conditioning (HVAC) systems. They provide compressed air for controlling and actuating dampers, valves, and actuators in HVAC systems, enabling precise regulation of air flow and temperature.

    5. Assisting in Industrial Processes: Compressed air is utilized in various industrial processes. It can be used for air blow-off applications, cleaning and drying parts, powering air-operated machinery, and controlling pneumatic systems. Air compressors provide a reliable and efficient source of compressed air that can be tailored to meet the specific requirements of different industrial applications.

    6. Supporting Scuba Diving and Breathing Systems: In scuba diving and other breathing systems, air compressors are responsible for filling diving tanks and supplying breathable air to divers. These compressors are designed to meet strict safety standards and deliver compressed air that is free from contaminants.

    Overall, the purpose of an air compressor is to provide a versatile source of compressed air for powering tools, supplying clean air for various applications, inflating tires and sports equipment, supporting industrial processes, and facilitating breathing systems in specific contexts.

    China Best Sales 100 CHINAMFG 7bar Energy Saving Dry Oil Free \Oilless Screw Air Compressor mini air compressorChina Best Sales 100 CHINAMFG 7bar Energy Saving Dry Oil Free \Oilless Screw Air Compressor mini air compressor
    editor by CX 2023-10-20

    China Good quality 1018-60 Piston Air Compressor 6 60mm portable air compressor

    Product Description

    Type Model filling time Power Pressure Capacity Cylinder Diameter Rotate Speed Volume Net Weight Dimension
    — — S W Mpa L³/min mm r/min L KGS MM
    Oil Free 1018-60 60 1800*2 1 360 Φ63.7*6 2850 60 46 760*315*635

    Lubrication Style: Oil-free
    Cooling System: Air Cooling
    Cylinder Arrangement: Balanced Opposed Arrangement
    Cylinder Position: Horizontal
    Volume: 60L
    Rotate Speed: 2850 R/Min
    Samples:
    US$ 268/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    How are air compressors employed in the petrochemical industry?

    Air compressors play a vital role in the petrochemical industry, where they are employed for various applications that require compressed air. The petrochemical industry encompasses the production of chemicals and products derived from petroleum and natural gas. Here’s an overview of how air compressors are utilized in the petrochemical industry:

    1. Instrumentation and Control Systems:

    Air compressors are used to power pneumatic instrumentation and control systems in petrochemical plants. These systems rely on compressed air to operate control valves, actuators, and other pneumatic devices that regulate processes such as flow control, pressure control, and temperature control. Compressed air provides a reliable and clean source of energy for these critical control mechanisms.

    2. Pneumatic Tools and Equipment:

    Petrochemical plants often utilize pneumatic tools and equipment for various tasks such as maintenance, repair, and construction activities. Air compressors supply the necessary compressed air to power these tools, including pneumatic drills, impact wrenches, grinders, sanders, and painting equipment. The versatility and convenience of compressed air make it an ideal energy source for a wide range of pneumatic tools used in the industry.

    3. Process Air and Gas Supply:

    Petrochemical processes often require a supply of compressed air and gases for specific applications. Air compressors are employed to generate compressed air for processes such as oxidation, combustion, and aeration. They may also be used to compress gases like nitrogen, hydrogen, and oxygen, which are utilized in various petrochemical reactions and treatment processes.

    4. Cooling and Ventilation:

    Petrochemical plants require adequate cooling and ventilation systems to maintain optimal operating conditions and ensure the safety of personnel. Air compressors are used to power cooling fans, blowers, and air circulation systems that help maintain the desired temperature, remove heat generated by equipment, and provide ventilation in critical areas.

    5. Nitrogen Generation:

    Nitrogen is widely used in the petrochemical industry for applications such as blanketing, purging, and inerting. Air compressors are utilized in nitrogen generation systems, where they compress atmospheric air, which is then passed through a nitrogen separation process to produce high-purity nitrogen gas. This nitrogen is used for various purposes, including preventing the formation of explosive mixtures, protecting sensitive equipment, and maintaining the integrity of stored products.

    6. Instrument Air:

    Instrument air is essential for operating pneumatic instruments, analyzers, and control devices throughout the petrochemical plant. Air compressors supply compressed air that is treated and conditioned to meet the stringent requirements of instrument air quality standards. Instrument air is used for tasks such as pneumatic conveying, pneumatic actuators, and calibration of instruments.

    By employing air compressors in the petrochemical industry, operators can ensure reliable and efficient operation of pneumatic systems, power various tools and equipment, support critical processes, and maintain safe and controlled environments.

    air compressor

    What is the energy efficiency of modern air compressors?

    The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

    Variable Speed Drive (VSD) Technology:

    Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

    Air Leakage Reduction:

    Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

    Efficient Motor Design:

    The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

    Optimized Control Systems:

    Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

    Air Storage and Distribution:

    Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

    Energy Management and Monitoring:

    Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

    It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

    Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

    air compressor

    How do oil-lubricated and oil-free air compressors differ?

    Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

    Oil-Lubricated Air Compressors:

    1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

    2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

    3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

    4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

    Oil-Free Air Compressors:

    1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

    2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

    3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

    4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

    When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

    China Good quality 1018-60 Piston Air Compressor 6 60mm portable air compressorChina Good quality 1018-60 Piston Air Compressor 6 60mm portable air compressor
    editor by CX 2023-10-20

    China Hot selling CHINAMFG 5500W 8bar (115psi) 7.5HP 500L Air Compressors Car Air Compressors Compressor with Best Sales

    Product Description

    Fixtec 5500W 8bar(115psi) 7.5HP 500L Air Compressors Car Air Compressors Compressor

    Main Products

    View more products,you can click product keywords…

    Main Products
    Power Tools Bench Tools Accessories
    Hand Tools Air Tools Water Pumps
    Welding Machine Generators PPE

    Product Description

    EBIC Tools is established in 2003, with rich experience in tools business, FIXTEC is our registered brand. One-stop tools station, including full line of power tools, hand tools, bench tools, air tools, welding machine, water pumps, generators, garden tools and power tools accessories etc.

    Product name

    7.5HP 500L Air Compressor

    Brand

    FIXTEC

    Model NO.

    FAC350075

     

     

     

    Specifications

     

    Voltage:380V-50HZ 

    Rated power:5.5KW (7.5HP) 

    Tank volume:500L 

    Work pressure:8bar(115psi)

    Cylinder:Φ80*3 

    Air Delivery(L/MIN,C.F.M):670L/MIN,23.80C.F.M 

    Neight Weight: 320KGS

     

    Package

    Carton Size: 193x68x123cm 

    Qty/CTN: 1PC 

    NW./GW. : 320kg/330kg

    Recommended products

    Customer Evaluation

    Company Profile

    FAQ

    FIXTEC team is based in China to support global marketing and we are looking for local distributors as our long term partners,Welcome to contact us!

     

    After-sales Service: *
    Warranty: *
    Lubrication Style: Oil-free
    Cooling System: Air Cooling
    Cylinder Arrangement: Parallel Arrangement
    Cylinder Position: Horizontal
    Samples:
    US$ 903/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    What are the advantages of using an air compressor in construction?

    Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

    • Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
    • Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
    • Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
    • Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
    • Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
    • Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
    • Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

    It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

    In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

    air compressor

    How do you choose the right air compressor for woodworking?

    Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

    1. Required Air Volume (CFM):

    Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

    2. Tank Size:

    Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

    3. Maximum Pressure (PSI):

    Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

    4. Noise Level:

    Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

    5. Portability:

    Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

    6. Power Source:

    Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

    7. Quality and Reliability:

    Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

    8. Budget:

    Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

    By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

    air compressor

    Are there air compressors specifically designed for high-pressure applications?

    Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

    1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

    2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

    3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

    4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

    • Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
    • Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
    • Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
    • Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
    • Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

    5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

    When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

    High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

    China Hot selling CHINAMFG 5500W 8bar (115psi) 7.5HP 500L Air Compressors Car Air Compressors Compressor with Best SalesChina Hot selling CHINAMFG 5500W 8bar (115psi) 7.5HP 500L Air Compressors Car Air Compressors Compressor with Best Sales
    editor by CX 2023-10-20

    China best 750-25L Mini Oil Free Air Compressor Can Adjust The Air Pressure with Pressure Regulator air compressor oil

    Product Description

                                                                 Technical  parameter
    Model

    Horsepower

    (KW/HP)

    Voltage

    (V/Hz)

    Exhaust Volume

    (L/min)

    Pressure

    (Bar)

    Tank

    (L)

    Noise

    (dB)

    Weight

    (kg)

    Meas

    (cm)
    YM750-25L 0.75/1.0 220/50 165 8 25 ≤48 22 55*25*56

     

    Features:
    1 CE Approved
    2 Color options: blue, white,yellow,red,black 
    3 OEM can be made according to client’s request

    Quality control:
    Following the sales tenet of “Quality First, Customer Foremost”, the company has gradually established an image of top products, premium quality, and best reputation”

    Customer questions & answers
    Q: What’s your MOQ?
    A: Our MOQ is 5 units per model . 

    Q: What’s your payment terms?
    A: We accept T/T ;
     
    Q: What’s the delivery time?
    A: We could deliver the goods within 30 days after order confirmed(OEM order)

     

    Lubrication Style: Oil-free
    Cooling System: Air Cooling
    Cylinder Arrangement: Duplex Arrangement
    Samples:
    US$ 200/Piece
    1 Piece(Min.Order)

    |

    Order Sample
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.





    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    air compressor

    What role do air dryers play in compressed air systems?

    Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

    1. Moisture Removal:

    Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

    2. Contaminant Removal:

    In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

    3. Protection of Equipment and Processes:

    By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

    4. Improved Productivity and Efficiency:

    Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

    5. Compliance with Standards and Specifications:

    Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

    By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

    air compressor

    How do you maintain proper air quality in compressed air systems?

    Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

    1. Air Filtration:

    Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

    2. Moisture Control:

    Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

    3. Oil Removal:

    If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

    4. Regular Maintenance:

    Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

    5. Air Receiver Tank Maintenance:

    Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

    6. Air Quality Testing:

    Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

    7. Education and Training:

    Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

    8. Documentation and Record-Keeping:

    Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

    By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

    air compressor

    Can air compressors be used for automotive applications?

    Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

    1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

    2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

    3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

    4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

    5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

    6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

    7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

    When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

    Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

    China best 750-25L Mini Oil Free Air Compressor Can Adjust The Air Pressure with Pressure Regulator air compressor oilChina best 750-25L Mini Oil Free Air Compressor Can Adjust The Air Pressure with Pressure Regulator air compressor oil
    editor by CX 2023-10-20

    China factory Small Rotary Screw Air Compressor Single Phase Made in China, Sold Directly by Chinese Dealers air compressor parts

    Product Description

     

    Product Description

     

    Inside Details:

    Multiple models are available:

    Technology Research and Development:

     

      Advantages:
     

    High efficient*Combined with direct driven arrangement for superior energy efficiency
    *Water seals and cools for ideal compression
    *Optimal compression processes with the water cooling

     

    Minimum service costs *Only air filter and water filter need maintenance
    *No lubricant costs
    *Fast and easy for minimal downtime

     

    High reliability*Simple and robust design
    * Low-speed direct drive, no high speed gears
    *Low operating temperatures, no special coatings

    High-quality air *Low air temperature, easy to dry and treat
    *No coating on routers that can contaminate or pollute the air
    *Class 0 air quality

     

    Environmental safety*Low noise level
    *Reduce energy consumption
    *No oil discharge to the environment
     

    Technical parameters

    Model Max Working
    Pressure    		 Capacity Motor Power Connection Dimension
    (L*W*H)    		 Air Tank
    — bar psig L/min hp kw inch mm L
    C5EV 8 116 200-400 5 3.7 G1/2 800*540*755 —
    10 145 175-350
    12.5 182 150-300
    C6EV 8 116 250-500 6 4.5 G1/2 800*540*755 —
    10 145 210-420
    12.5 182 180-360
    C7EV 8 116 315-630 7 5.5 G1/2 800*540*755 —
    10 145 275-550
    12.5 182 210-420
    C10EV 8 116 490-980 10 7.5 G1/2 800*560*860 —
    10 145 450-900
    12.5 182 400-800

    FAQ

     

    Q1: Why customer choose us?

    O: CHINAMFG Technology Development Co, Ltd is a professional manufacturer for air compressor and after treatment equipment. We have more than 20 years experience in producing and exporting air compressor, air dryer and air filter.

     

    Q2: Are you a manufacturer or trading company?

    O: Our factory is located in ZheJiang China, we have research and develop center, advanced processing equipment, professional technicians, rich experience workers and after-sales team to offer good quality products and good service to our customers. We also can provide you the OEM&ODM service.

     

    Q3: What’s your delivery time?

    O: Generally 10 days, if urgently order, pls contact our sales in advance

     

    Q4: How long is your air compressor warranty?

    O: One year for the whole machine when the compressor leave our factory.

     

    Q5: How long could your air compressor be used?

    O: Generally, more than 10 years

     

    Q6: What’s payment term?

    O: T/T, L/C, Paypal and etc. Also we could accept USD, RMB, Euro and other currency (Pls contact our sales for more information

     

    Q7: How about your customer service?

    O: 24 hours on-line service available

     

    Q8: How about your after-sales service?

    O: 1. Provide customers with installation and commissioning online instructions.
    2. Well-trained engineers available to overseas service
    3. World wide agents and after service available

     

    After-sales Service: 1 Year
    Warranty: 1 Year
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Structure Type: Closed Type
    Samples:
    US$ 1350/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    Customization:
    Available

    |

    air compressor

    Can air compressors be used for shipbuilding and maritime applications?

    Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

    1. Pneumatic Tools and Equipment:

    Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

    2. Painting and Surface Preparation:

    Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

    3. Pneumatic Actuation and Controls:

    Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

    4. Air Start Systems:

    In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

    5. Pneumatic Conveying and Material Handling:

    In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

    6. Air Conditioning and Ventilation:

    Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

    These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

    air compressor

    How does the horsepower of an air compressor affect its capabilities?

    The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

    Power Output:

    The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

    Air Pressure:

    The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

    Air Volume:

    In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

    Duty Cycle:

    The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

    Size and Portability:

    It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

    When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

    Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

    air compressor

    What are the different types of air compressors?

    There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

    1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

    2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

    3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

    4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

    5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

    6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

    These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

    China factory Small Rotary Screw Air Compressor Single Phase Made in China, Sold Directly by Chinese Dealers air compressor partsChina factory Small Rotary Screw Air Compressor Single Phase Made in China, Sold Directly by Chinese Dealers air compressor parts
    editor by CX 2023-10-20

    China wholesaler European Luxury CHINAMFG Wood Sofas French Villa Teak Patio Wooden Garden Outdoor Furniture Teak Sofa vacuum pump connector

    Product Description

    Outdoor patio furniture sofa set for garden

    Features:

    * CONTEMPORARY DESIGN – This outdoor furniture set is a great decoration to your patio, garden, deck, backyard, porch.

    * STURDY & STABLE: Constructed from all-weather over a durable steel frame, this balcony furniture set boasts
    * UPGRADED COMFORT – The thick cushions are covered with sun polyester fabric bring you strong support for better comfort.Removable cushion covers allow for easy cleaning and maintenance.

    * CHARMING CONVERSATION SET – The sectional seating can be assembled into either a left or right chaise, and its sturdy frame is designed to be extra durable. Perfect for reading, relaxing, or family gathering.
     

    Material Wood,Aluminum, Rattan,Rope,fabric,
    Advantages 1. Professional services.(12 years of factory experience)
    2. pretty competitive price. (Ex-factory price)
    3.OEM is available.(OEM and ODM one-stop service)
    Useage garden, hotel and so on Advantages
    Package Standard export carton and wood frame, with EPE foam inside to protect edges.
    Style  Modern
    Color  Color can be optional
    Lead Time  20-25 days after deposit received
    Payment terms  30% deposit T/T, 70% need paied before delivery
    Quality Control 100 % inspection before packing

     


    Q1. Any discount?
    A1. At first, the price we quote are all wholesale price. Meanwhile, our best price will be offered according to the order quantity. So please tell us your purchase quantity when you inquire.I believe we can meet your need perfectly with competitive price and high quality.

     

    Q2. Can I have a sample order?
    A2. Yes, samples are available if necessary. Yet for consideration of saving postage, we also provide detailed pictures and other documents you require to smooth your concern as an alternative solution.

     

    Q3. How long is the delivery time?
    A3. Normally it will only take about 8-30 days according to type of product and quantity of your order.

     

    Q4. How to deal with the faulty?
    A4. Firstly, our products are produced in strict quality control system and the defective rate is very low.

    Secondly, during the guarantee period, we will send replacement for free.

     

    Q5. What can I do if the item is damaged during transportation?
    A5. Our customer service staffs will help you with any questions or concerns. Under any circumstance, We will take well packed products pictures before shipping. So if any damage on products, please take pictures for us.

     

    Q6.Are you manufacturer or trade company?

    A6- We are the Manufacture/Factory.

     

    Q7. Why choose our company ?

    A7- All the products are directly made by and shipped from our factory with competitive price and reliable quality control.

    – We have skillful technician production team and inspection team, to ensure delivery qualified product on time.

    – To our regular customers, they may have a VIP price.

    – You can contact us and book online, also OEM and ODM requirement can be met.

     

    – We welcome to all clients visit our factory.

    – Professional team to provide good after-sale service.

    Material: Wood
    Frame Material: Wood
    Style: Modern
    Type: Combination
    Usage: Bar, Cafe, Restaurant
    Folded: Unfolded
    Customization:
    Available

    |

    oudoor furniture

    What are the best practices for assembling and maintaining garden furniture with glass tops?

    Garden furniture with glass tops can add a touch of elegance to your outdoor space. Here are some best practices for assembling and maintaining this type of furniture:

    1. Assembling Garden Furniture:

    When assembling garden furniture with glass tops, follow these guidelines:

    • Read and follow the manufacturer’s instructions carefully.
    • Ensure that the assembly area is clean, flat, and stable.
    • Handle the glass top with care to avoid any accidental damage or breakage.
    • Use the provided hardware and tools to secure the glass top to the frame according to the instructions.
    • Double-check that all connections are tightened properly, but avoid overtightening to prevent damage to the glass.
    • If applicable, attach any additional components or accessories, such as umbrella holders or cushions, as instructed.

    2. Cleaning and Maintenance:

    To maintain garden furniture with glass tops, consider the following:

    • Regularly clean the glass surface using a mild glass cleaner or a mixture of water and vinegar. Avoid using harsh chemicals or abrasive cleaners that can damage the glass.
    • Wipe the glass top with a soft, lint-free cloth or a microfiber cloth to remove dust, dirt, or fingerprints. For stubborn stains, gently scrub the affected area with a soft brush or sponge.
    • Avoid placing hot objects directly on the glass surface, as extreme temperature changes can cause the glass to crack or shatter.
    • Protect the glass top from scratches by using coasters, placemats, or tablecloths when placing items on the surface.
    • If your furniture includes removable glass tops, consider storing them indoors or in a safe, covered area during severe weather conditions or when not in use for an extended period.

    3. Preventative Measures:

    Take these preventative measures to ensure the longevity of your garden furniture with glass tops:

    • Avoid dragging or sliding heavy objects across the glass surface, as this can cause scratches or damage.
    • Regularly inspect the frame and connections to ensure they remain sturdy and secure. Tighten any loose screws or bolts as necessary.
    • Consider using furniture covers specifically designed for garden furniture with glass tops to protect it from dust, dirt, and the elements when not in use.
    • During strong winds or storms, move the furniture to a sheltered area or secure it with straps or anchors to prevent it from being blown over or damaged.

    By following these best practices, you can assemble and maintain your garden furniture with glass tops effectively, ensuring its longevity and enjoyment for years to come.

    oudoor furniture

    What are the top considerations for selecting garden furniture near a pool?

    When selecting garden furniture to be placed near a pool, there are several important considerations to keep in mind. These considerations help ensure that the furniture is suitable for the poolside environment and enhances your outdoor experience. Here are the top factors to consider:

    1. Material Durability:

    Choose garden furniture made from materials that are durable and can withstand exposure to water, sunlight, and pool chemicals. Common materials for poolside furniture include aluminum, teak, wrought iron, resin wicker, and certain types of plastic. These materials are known for their resistance to rust, fading, and deterioration in outdoor settings.

    2. Water and Moisture Resistance:

    Opt for furniture that is water and moisture resistant, as it will be exposed to splashes from the pool and occasional wet conditions. Look for cushions and upholstery made from quick-drying and water-resistant fabrics. Additionally, consider furniture with slatted designs or mesh materials that allow for better water drainage and airflow.

    3. UV Resistance:

    Ensure that the garden furniture you choose is UV resistant to protect it from sun damage. Prolonged exposure to sunlight can cause fading, discoloration, and deterioration of materials. Look for furniture with UV-resistant finishes or materials that are specially designed to withstand the sun’s rays.

    4. Easy Maintenance:

    Select furniture that is easy to clean and maintain, as poolside areas can be prone to dirt, splashes, and other debris. Consider furniture with smooth surfaces, stain-resistant fabrics, or removable and washable cushion covers. Furniture that requires minimal upkeep will save you time and effort in the long run.

    5. Comfort and Ergonomics:

    Choose poolside furniture that offers comfort and ergonomic support. Look for chairs and loungers with adjustable features, such as reclining backrests and removable cushions. Additionally, consider furniture with armrests and supportive seating that allows for comfortable relaxation by the pool.

    6. Safety Features:

    Prioritize safety when selecting garden furniture near a pool. Avoid furniture with sharp edges or protruding parts that could pose a hazard, especially if you have children or pets. Opt for furniture with stable and sturdy construction that can withstand accidental bumps or knocks.

    7. Style and Aesthetics:

    Consider the style and aesthetics of the garden furniture to ensure it complements the overall poolside area. Choose furniture that aligns with your preferred design theme and enhances the visual appeal of the space. Whether you prefer modern, contemporary, or more traditional styles, select furniture that harmonizes with your outdoor environment.

    8. Portability and Storage:

    If you prefer flexibility or need to store the furniture during certain seasons, consider the portability and storage options. Look for lightweight furniture that is easy to move around, especially if you plan to rearrange the seating arrangement. Additionally, consider folding or stackable furniture that can be conveniently stored when not in use.

    By considering these factors, you can choose garden furniture that is well-suited for the poolside environment, enhances your outdoor space, and provides comfort and durability for years to come.

    oudoor furniture

    What are the latest trends in garden furniture designs and styles?

    Garden furniture designs and styles evolve over time, influenced by changing tastes, technological advancements, and emerging trends. Here are some of the latest trends in garden furniture designs:

    1. Minimalist and Contemporary:

    Minimalist and contemporary designs continue to be popular in garden furniture. Clean lines, sleek profiles, and minimalist aesthetics create a modern and sophisticated look. Neutral colors and simple silhouettes are often seen in these designs.

    2. Outdoor Living Spaces:

    There is a growing trend towards creating outdoor living spaces that blur the boundaries between indoor and outdoor areas. Furniture designs that mimic indoor comfort and style, such as plush seating with cushions and outdoor rugs, are increasingly popular. This trend emphasizes creating cozy and inviting outdoor environments.

    3. Modular and Versatile:

    Modular furniture designs offer versatility and adaptability. These designs include sectional seating arrangements that can be rearranged to suit different occasions or to fit various outdoor spaces. The ability to customize and reconfigure the furniture provides flexibility and convenience.

    4. Sustainable and Eco-Friendly:

    With a growing emphasis on sustainability, eco-friendly garden furniture designs are gaining popularity. Materials like reclaimed wood, recycled plastic, and responsibly sourced teak are being used to create environmentally conscious furniture. Additionally, designs that promote water conservation and energy efficiency are also becoming more prevalent.

    5. Mixed Materials:

    Combining different materials in garden furniture is a trend that adds visual interest and texture. For example, incorporating wood with metal or wicker with aluminum creates a contemporary and eclectic look. Mixing materials allows for unique and personalized designs.

    6. Bold Colors and Patterns:

    While neutral colors remain popular, there is also a trend towards incorporating bold colors and patterns in garden furniture. Vibrant hues like deep blues, rich greens, and warm oranges are being used to make a statement. Patterns such as stripes, geometric designs, and floral prints add visual excitement to outdoor spaces.

    7. Multifunctional Pieces:

    Garden furniture that serves multiple purposes is on the rise. Examples include benches with built-in storage, coffee tables that convert into dining tables, or loungers with adjustable features. This trend maximizes functionality and optimizes space utilization in outdoor areas.

    These are just a few of the latest trends in garden furniture designs and styles. Ultimately, it’s important to choose a style that resonates with your personal preferences and complements the overall aesthetic of your outdoor space.

    editor by CX 2023-10-20

    China high quality Hotel Villa Patio Garden Outdoor Rope Dining Furniture vacuum pump oil

    Product Description

     

    Product Description

    Model number CF1479T-1+CF1479C
    Materials Aluminum, rope, teakwood
    Color Optional
    Warranty 2~5 years
    Application Outdoor, Hotel, Garden, Patio, etc

    Materials:
    1.Frame:High quality aluminum frame with powder-coated to prevent rust
    2.Rattan/Rope:Durable and UV resistant, optional color
    3.Cushion:100% polyester, water-resistant cushion and pillows

    Features:

    1: Excellent pure hand weaving technique with popular style.
    2: Green product, UV-resistant, weatherproof and colorfast.
    3: With long performance life, very durable and practical.
    4: Perfect for casual dining and entertaining indoor or outside.
    5: High quality with competitive price and timely delivery.

     

     

    Wicker Sample                                                                                                  Fabric Sample

    Flat wicker, half round wicker, round wicker                                                       Different color options for the cushion and pillow fabric.

    Material: Rattan / Wicker

    1. 100% all brand new PE rattan / wicker,

     

    2. style: flat wicker / half round wicker / round wicker / rope

     

    3. 99% looks like real wicker, price cheaper then real wicker, and PE wicker is more durable!

     

    4. UV-resistant, waterproof and color lasting, for all season use.

    Diffferent Weaving Pattern:

    There are different weaving method, such as cow eyes weaving, square weaving, 4 in 1 weaving, etc

     

    100% all weaving by hand!

     

    Therefore, many of our weaving master were in our factory for over 10 years, they grew with us together and are of experienced!

     

    So you don’t need to worry about our weaving, we are confident with it!

    Our Service

    Select items: welcome to our store and select the items you interested. Or let us know what you had, we can custom make it.
    Inquiry to us:

    email us your request, we will offer you in 24 hours.
    Negotiation:

    Prices, payment way, delivery time, shipping, etc… we will CHINAMFG a contract.
    Pay deposit:

    buyer arrange down payment.we will arrange production at soonest.
    Production complete:

    we will inform you before 1 week time of production complete.
    Take photos:

    we will take photos and send to you for reference 2 days before shipping.
    Balance:

    please arrange the balance payment once confirmed.we’ll arrange shipment as planed.
    Send documents:

    we will send you CHINAMFG B/L and custom documents (packing list, commercial invoice, AQIS etc) by express. Or Telex Released B/L.
    Satisfy & repeat orders:

    We thank you for your great support, and look CHINAMFG to building long-term cooperation with you.

     

     

    Packaging & Shipping

    Certifications

    Why choose us?
    1. 15 years + experience
    2. Use high quality raw material from home and overseas
    3. Fast response
    4. Low Moq, immediate delivery

     

    Project

     

    Company Profile

    HangZhou Xihu (West Lake) Dis. Ciao Furniture Co., LTD is located in Xihu (West Lake) Dis. District, HangZhou City. We spelized in manufacturing outdoor rattan furniture, such as outdoor rattan gardden sofas, outdoor rattan table and chairs, out door rattan chaise loungers, outdoor flower pots, cushion box, and many kinds of customized products for 15 years.

     

    With good quality control system and reasonable management,now we are a factory with a 10000 square meter workshop, and 800 square
    meter sample showroom, and 100 experience workers.Our month supply ability reach 30 containers,year sales amount more than 10
    million US dollar.300 more regular customers all over the world.

     

    For our product, we offer middle&high modern and classic outdoor furniture. Two years warranty could give our clients more confidence,quick delivery time,competitive price and good quality give our client more convenient.

    Customers are our friends and business partners. We arm at helping our customer to win more market ,Our
    mission is”customer win, we win”,We are pleased to grow up with you together.

    Warmly welcome you to come and visit our factory!

    Factory Size

    10,000 sqm

    Factory Location

    Xihu (West Lake) Dis., HangZhou City

    R&D staff

    21 – 30 people

    QC staff

    6 – 10 people

    Contract Manufacturing

    OEM service offered design service offered buyer label offered

    Main Market

    North America,South America,Eastern
    Asia,Africa,Oceania,Mid. East,Eastern Asia,Western Europe

    Export Percentage

    85% – 95%

    Total Annual Sales Volume

    USD 3 Million to USD 5 Million


     

    Showroom

     

    Exhibition

    FAQ

    1. What is your MOQ?

    MOQ is 1*20 GP container
    1*20GP container with no more than 3 items
    1*40HQ container with no more than 5 items.

    2. Do you aceept sample order?
    We accept sample order.However customer has to pay for the product cost and shipping cost.

    3. Can I customize outdoor furniture from you?
    Yes, can change the Dimension according to your needs.

    4. Do you have own factory?
    Yes, we are manufacturer with own factory and moulds and production lines, engaged in outdoor furniture for more than 11 years.

    5. How about your Lead time?
    Our production process needs 15-35 days depend on the product’s design and when will you place the order.

    6. What about the payment term?
    a.More than USD1700, 30%deposit T/T paid before production,the balance paid paid before delivery
    b.Less than USD1700,100% deposit paid before production.

    Material: Aluminum
    Style: Modern
    Usage: Bar, Hotel, Dining Room, Outdoor
    Folded: Unfolded
    Customized: Customized
    Condition: New
    Customization:
    Available

    |

    oudoor furniture

    How do I keep outdoor furniture from getting blown away during windy weather?

    Preventing outdoor furniture from getting blown away during windy weather requires taking certain precautions to secure the furniture and minimize the risk of damage or displacement. Here are some effective methods:

    1. Choose Heavy and Sturdy Furniture:

    Opt for outdoor furniture that is heavy and sturdy. Furniture with a solid construction and a low center of gravity is less likely to be blown away by strong winds. Materials such as cast iron or solid wood can provide better stability.

    2. Anchor the Furniture:

    Secure the furniture to the ground or a fixed structure using anchors or tie-downs. Anchoring systems, such as straps, cables, or stakes, can be attached to the furniture and anchored to the ground or nearby structures to prevent movement or tipping over.

    3. Use Sandbags or Weights:

    Place sandbags or weights on the base or legs of the furniture to add extra stability. The additional weight helps keep the furniture grounded and reduces the chances of it being blown away by strong winds.

    4. Position Furniture Strategically:

    Consider the placement of the furniture in your outdoor space. Position it in areas that are sheltered or surrounded by windbreaks, such as walls, fences, or trees. These natural barriers help reduce the impact of wind and provide some protection to the furniture.

    5. Fold and Store:

    If your outdoor furniture is foldable or collapsible, consider folding and storing it indoors or in a secure storage area during periods of strong winds. This eliminates the risk of damage and ensures the furniture remains intact.

    6. Use Windproof Accessories:

    Utilize windproof accessories designed specifically for outdoor furniture. These may include clips, straps, or fasteners that secure cushions, covers, or other removable parts of the furniture, preventing them from being blown away or displaced.

    7. Store Removable Cushions and Accessories:

    During windy weather, remove cushions, pillows, or other accessories from the outdoor furniture and store them indoors. Lightweight items are more susceptible to being blown away, and storing them safely prevents damage or loss.

    8. Monitor Weather Forecasts:

    Stay informed about weather conditions and forecasts in your area. If strong winds or severe weather are expected, take proactive measures to secure the outdoor furniture in advance.

    9. Regular Maintenance:

    Maintain your outdoor furniture regularly to ensure its stability and durability. Tighten any loose fittings, repair damaged parts, and replace worn-out components to keep the furniture in optimal condition.

    By implementing these measures, you can significantly reduce the risk of outdoor furniture being blown away during windy weather, protecting your investment and ensuring the safety of your outdoor space.

    oudoor furniture

    What should I look for in outdoor furniture covers to protect against rain and sun?

    When selecting outdoor furniture covers to protect against rain and sun, there are several factors to consider. Here are some key features to look for:

    1. Waterproof or Water-Resistant Material: Look for covers made from waterproof or water-resistant materials to protect your outdoor furniture from rain. Materials such as polyester, vinyl, or specially coated fabrics are effective in repelling water and preventing it from seeping through the cover and damaging the furniture.

    2. UV Protection: Sun exposure can cause fading, discoloration, and deterioration of outdoor furniture. Ensure that the covers you choose offer UV protection to shield your furniture from harmful UV rays. Look for covers made from materials with UV-resistant coatings or those specifically designed to block UV radiation.

    3. Durable Construction: Outdoor furniture covers should be constructed with durable materials and strong stitching to withstand the elements. Look for covers with reinforced seams and high-quality materials that can resist tearing and abrasion. Reinforced corners or straps can also help secure the covers in place during windy conditions.

    4. Proper Fit: It’s important to choose covers that fit your outdoor furniture properly. Covers that are too small may not provide adequate protection, while those that are too large may be prone to being blown away or collecting water. Look for covers with adjustable straps, drawstrings, or elastic hems that allow you to secure them snugly around the furniture.

    5. Breathability: While it’s essential for outdoor furniture covers to be waterproof, they should also be breathable to prevent the buildup of condensation and promote airflow. Look for covers with vents or mesh panels that allow moisture to escape, reducing the risk of mold or mildew formation.

    6. Ease of Use and Maintenance: Consider covers that are easy to put on and take off your outdoor furniture. Covers with features like zipper closures, Velcro straps, or buckles can make the process more convenient. Additionally, look for covers that are easy to clean and maintain, as they will require periodic washing to remove dirt, debris, and stains.

    7. Warranty: Check if the outdoor furniture covers come with a warranty. A warranty indicates that the manufacturer stands behind the quality and durability of their product.

    When purchasing outdoor furniture covers, it’s advisable to measure your furniture dimensions accurately and choose covers that are designed for your specific furniture type or style. This will ensure a better fit and optimal protection.

    oudoor furniture

    What are the benefits of investing in high-quality outdoor furniture?

    Investing in high-quality outdoor furniture offers numerous benefits that make it a worthwhile investment. Here are the key advantages of choosing high-quality outdoor furniture:

    1. Durability and Longevity: High-quality outdoor furniture is built to withstand the elements and is often made from durable materials. It can resist fading, rusting, warping, and other forms of damage caused by sun exposure, rain, wind, or temperature fluctuations. Investing in durable furniture ensures it lasts for many years, saving you money in the long run.

    2. Comfort and Ergonomics: High-quality outdoor furniture is designed with comfort in mind. It often includes features such as ergonomic shapes, supportive cushions, and adjustable components. You and your guests can enjoy the outdoor space comfortably, whether you’re lounging, dining, or socializing.

    3. Enhanced Aesthetics: High-quality outdoor furniture tends to have better craftsmanship and attention to detail, resulting in a more attractive and visually appealing appearance. It can elevate the aesthetic appeal of your outdoor space, creating a stylish and inviting atmosphere.

    4. Low Maintenance: High-quality outdoor furniture typically requires less maintenance compared to lower-quality alternatives. It is often designed to be resistant to stains, fading, and other forms of wear and tear, reducing the need for frequent cleaning or repairs. This saves you time and effort in maintaining your outdoor furniture.

    5. Functionality and Versatility: High-quality outdoor furniture often offers a range of functional features and versatile designs. It may include modular components, adjustable settings, or multi-purpose functionality, allowing you to adapt the furniture to different activities or changing needs. This flexibility enhances the usability and practicality of your outdoor space.

    6. Warranty and Customer Support: High-quality outdoor furniture is often backed by warranties from the manufacturer or retailer. This provides peace of mind, as you can rely on the warranty to address any manufacturing defects or issues that may arise. Additionally, reputable brands that offer high-quality furniture often have good customer support, ensuring you receive assistance if needed.

    7. Value and Investment: While high-quality outdoor furniture may have a higher upfront cost, it offers better value and return on investment over time. The durability, longevity, and overall performance of high-quality furniture make it a wise investment that can withstand the test of time and provide enjoyment for years to come.

    By investing in high-quality outdoor furniture, you can create a comfortable, durable, and visually appealing outdoor space that enhances your lifestyle and adds value to your home.

    editor by CX 2023-10-20

    China best Factory OEM Waterproof Large Outdoor Furniture L Shape with Table Sectional Garden Rope Patio Sofa Set Aluminium for Resort vacuum pump engine

    Product Description

    Outdoor patio furniture sofa set for garden

    Features:

    * CONTEMPORARY DESIGN – This outdoor furniture set is a great decoration to your patio, garden, deck, backyard, porch.

    * STURDY & STABLE: Constructed from all-weather over a durable steel frame, this balcony furniture set boasts
    * UPGRADED COMFORT – The thick cushions are covered with sun polyester fabric bring you strong support for better comfort.Removable cushion covers allow for easy cleaning and maintenance.

    * CHARMING CONVERSATION SET – The sectional seating can be assembled into either a left or right chaise, and its sturdy frame is designed to be extra durable. Perfect for reading, relaxing, or family gathering.
     

    Material Wood,Aluminum, Rattan,Rope,fabric,
    Advantages 1. Professional services.(12 years of factory experience)
    2. pretty competitive price. (Ex-factory price)
    3.OEM is available.(OEM and ODM one-stop service)
    Useage garden, hotel and so on Advantages
    Package Standard export carton and wood frame, with EPE foam inside to protect edges.
    Style  Modern
    Color  Color can be optional
    Lead Time  20-25 days after deposit received
    Payment terms  30% deposit T/T, 70% need paied before delivery
    Quality Control 100 % inspection before packing

     


    Q1. Any discount?
    A1. At first, the price we quote are all wholesale price. Meanwhile, our best price will be offered according to the order quantity. So please tell us your purchase quantity when you inquire.I believe we can meet your need perfectly with competitive price and high quality.

     

    Q2. Can I have a sample order?
    A2. Yes, samples are available if necessary. Yet for consideration of saving postage, we also provide detailed pictures and other documents you require to smooth your concern as an alternative solution.

     

    Q3. How long is the delivery time?
    A3. Normally it will only take about 8-30 days according to type of product and quantity of your order.

     

    Q4. How to deal with the faulty?
    A4. Firstly, our products are produced in strict quality control system and the defective rate is very low.

    Secondly, during the guarantee period, we will send replacement for free.

     

    Q5. What can I do if the item is damaged during transportation?
    A5. Our customer service staffs will help you with any questions or concerns. Under any circumstance, We will take well packed products pictures before shipping. So if any damage on products, please take pictures for us.

     

    Q6.Are you manufacturer or trade company?

    A6- We are the Manufacture/Factory.

     

    Q7. Why choose our company ?

    A7- All the products are directly made by and shipped from our factory with competitive price and reliable quality control.

    – We have skillful technician production team and inspection team, to ensure delivery qualified product on time.

    – To our regular customers, they may have a VIP price.

    – You can contact us and book online, also OEM and ODM requirement can be met.

     

    – We welcome to all clients visit our factory.

    – Professional team to provide good after-sale service.

    Style: Modern
    Type: Combination
    Usage: Bar, Cafe, Restaurant
    Folded: Unfolded
    Customized: Customized
    Condition: New
    Customization:
    Available

    |

    oudoor furniture

    Are there any DIY projects for customizing aluminum garden furniture pieces?

    Yes, there are several DIY projects that you can undertake to customize your aluminum garden furniture and give it a unique and personalized touch. Here are some ideas:

    1. Paint or Powder Coat:

    Consider painting or powder coating your aluminum furniture to change its color or give it a fresh look. Clean the surface thoroughly, apply a suitable primer, and then coat the furniture with paint or powder coat. Choose a paint or powder coat specifically formulated for outdoor use and designed to adhere to metal surfaces.

    2. Stencil Designs:

    Use stencils to add decorative patterns or designs to your aluminum furniture. You can stencil the seat backs, tabletops, or any other flat surface. Select a stencil design that complements your outdoor decor and use outdoor-rated paint or spray paint for durability.

    3. Reupholster Cushions:

    If your aluminum furniture has cushions, consider reupholstering them to update their look. Choose outdoor fabrics that are resistant to fading and can withstand outdoor conditions. Remove the old fabric, measure and cut the new fabric, and sew or staple it onto the cushions for a fresh and customized appearance.

    4. Add Decorative Accents:

    Enhance the aesthetics of your aluminum furniture by adding decorative accents. For example, you can attach decorative knobs or drawer pulls to drawers or doors, incorporate mosaic tiles onto tabletops, or use adhesive decals or vinyl stickers to create unique designs or patterns.

    5. Install Lighting:

    Add lighting elements to your aluminum furniture to create ambiance and functionality. You can attach LED strip lights underneath the furniture for a subtle glow, install solar-powered lights on tabletops or chair arms, or incorporate string lights around the furniture for a festive touch.

    6. Create Mosaic Designs:

    If you enjoy working with tiles, consider creating mosaic designs on your aluminum furniture. Use adhesive or grout to attach small tiles or broken pieces of tiles to tabletops, seat backs, or other suitable surfaces. Mosaic designs can add a vibrant and artistic element to your furniture.

    7. Add Cushions or Pillows:

    Customize your aluminum furniture by adding cushions or pillows in different colors, patterns, and textures. This simple addition can instantly change the look and feel of the furniture, making it more comfortable and visually appealing.

    8. Create a Vertical Garden:

    If your aluminum furniture has vertical surfaces, such as trellises or backrests, you can transform them into a vertical garden. Attach small pots or planters to the surface and fill them with your favorite plants or herbs. This DIY project adds a green and natural element to your furniture.

    These are just a few DIY projects to customize your aluminum garden furniture. Get creative and explore different techniques and materials to make your furniture truly unique and reflective of your personal style.

    oudoor furniture

    How do I secure aluminum garden furniture to prevent it from tipping over in strong winds?

    To prevent aluminum garden furniture from tipping over in strong winds, there are several measures you can take to secure it effectively. Here are some methods to consider:

    1. Anchor with Weights:

    One of the simplest ways to secure your aluminum garden furniture is by using weights or anchors. This method involves attaching heavy objects to the furniture to increase its stability and prevent tipping. You can use sandbags, concrete blocks, or specially designed furniture weights. Place the weights on the base or legs of the furniture to provide additional stability.

    2. Tie-Down Straps:

    Using tie-down straps is another effective method to secure your aluminum garden furniture. These straps are typically made of durable materials like nylon or polyester and have adjustable buckles or hooks. Attach one end of the strap to the furniture and the other end to a stable structure such as a wall, fence, or ground anchor. Tighten the straps to ensure the furniture is securely fastened.

    3. Ground Stakes:

    If your aluminum furniture has legs or a base that can be inserted into the ground, using ground stakes can provide stability. Ground stakes are long, pointed rods that can be driven into the ground next to the furniture legs or base. This helps anchor the furniture and prevent it from tipping over in strong winds. Ensure that the stakes are securely inserted and tightly hold the furniture in place.

    4. Wind Clips or Straps:

    Wind clips or straps are designed specifically to secure outdoor furniture in windy conditions. These clips or straps attach to the furniture and anchor it to the ground or another stable surface. They often come with adjustable features to accommodate different furniture shapes and sizes, providing a secure connection.

    5. Store or Seek Shelter:

    In extreme weather conditions, such as storms or hurricanes, it may be best to store your aluminum garden furniture indoors or in a secure storage area. If indoor storage is not possible, consider seeking shelter for the furniture, such as a covered patio, gazebo, or shed. This can provide protection from strong winds and reduce the risk of tipping.

    It’s important to assess the specific needs and design of your aluminum garden furniture when choosing a method to secure it. Additionally, always follow manufacturer recommendations and guidelines for securing your furniture, as they may provide specific instructions based on the design and construction of the furniture.

    By implementing these measures, you can help ensure that your aluminum garden furniture remains stable and secure even in the face of strong winds, reducing the risk of damage or accidents.

    oudoor furniture

    Can you recommend affordable options for aluminum garden furniture sets?

    If you’re looking for affordable options for aluminum garden furniture sets, there are several brands and retailers that offer budget-friendly choices. Here are some recommendations for affordable aluminum garden furniture sets:

    1. IKEA:

    IKEA is known for its affordable furniture options, and they offer a variety of aluminum garden furniture sets at budget-friendly prices. They have a range of styles and designs to choose from, suitable for different outdoor spaces and preferences.

    2. Amazon Basics:

    Amazon Basics is Amazon’s own brand that offers a wide range of products at affordable prices. They have aluminum garden furniture sets that are competitively priced and often come with positive customer reviews.

    3. Walmart:

    Walmart is a popular retailer that offers a range of affordable outdoor furniture options, including aluminum garden furniture sets. They have a variety of styles and sizes available, allowing you to find a set that fits your budget and outdoor space.

    4. Target:

    Target is another retailer that offers affordable and stylish aluminum garden furniture sets. They often have seasonal sales and promotions, making it a good place to find budget-friendly options.

    5. Wayfair:

    Wayfair is an online furniture retailer that offers a wide selection of aluminum garden furniture sets at various price points. They have frequent sales and deals, allowing you to find affordable options without compromising on quality or style.

    6. Local Discount Stores:

    Check your local discount stores or home improvement stores for discounted aluminum garden furniture sets. These stores often carry budget-friendly options, especially during the off-season or clearance sales.

    When searching for affordable aluminum garden furniture sets, it’s important to compare prices, read customer reviews, and consider the quality and durability of the furniture. Look for sets that offer a good balance between affordability and functionality.

    Remember to also consider factors such as warranty, customer service, and any additional features or accessories included with the set. With careful research and comparison, you can find affordable aluminum garden furniture sets that meet your needs and budget.

    editor by CX 2023-10-20

    China Best Sales Outdoor Aluminum Alloy Iron Compact Lazy Carrying Pouch Ultralight Reclining Beach CHINAMFG Picnic Portable Folding Moon Lounge Butterfly Kermit Camping Chair vacuum pump distributors

    Product Description

     Amazon Popular Outdoor Furniture Kermit Aluminum Portable Folding Camping Chair For Picnic 

    Product Parameters

     

    Product name

    		   Folding Camping Chair 

    Material

    		    Aluminum Alloy/Iron  + 600D Oxford Cloth
       Usage   Beach,Camping

    Size

    		    55*44*63 cm;55*53*79 cm (Large Size )
      Load Capacity   120 kg

    Weight

    2.6-3.1kg

    Package

    		   1pcs/Carton ; 55*7.5*57cm;55*7.5*74cm(L Size )

    OEM

    Color , packaging

    Lead Time

    		   According to mass production quantity
      Color  Khaki,Black,Green

    Product Description

     
    Information about this product:
     

    Portable and Foldable:
    A regular chair weighs about 2.6kg and a large size is about 3.1kg. What’s more, the chair can be stored in just 1 step, making it perfect for carrying
    High-Quality Fabrics:
    The back and surface of the chair are made of Oxford fabric, which is breathable, lightweight and tear-resistant.
    Lightweight Aluminum Bracket :
    The bracket is made of aluminum, a portable and durable material that can withstand a weight of 120Kg.
    Dimensions :
    The unfold size of this product is 55*44*63 cm”; 55*53*79cm”(L). The fold size is 55*63cm; 55*79cm”(L).
    Various Application Scenarios :
    Whether it’s indoors or outdoors, independent travel or outdoor parties, this chair will be there for you.

     

    Aluminum /Iron Tube Thermal transfer: Large  Size &Regular Size 
     

     

    Iron Tube Spray : Large  Size &Regular Size 
     

     

     

     

     

     

    Packaging & Shipping

    Certifications

     

    Company Profile

    ZheJiang Zhenglin Import and Export Co., Ltd. Was founded in July 2013 and located in HangZhou City, ZheJiang Province (the company’s predecessor was ZheJiang Jianjie Lanyi Company.
    At present, there are 2 factories in ZheJiang with an area of more than 40000 square meters). It is a foreign trade oriented production enterprise that integrates research and development, production, and sales. We specialize in the production of indoor and outdoor furniture such as Rattan Woven Furniture, WPC Plastic Wood Furniture,Outdoor Camping and Leisure Products.
    We possess independent intellectual property rights and core technologies, and have over 60 domestic and foreign patents for invention,appearances, and utility models. We continuously improve the excellent quality of our products through technological research and innovation, and always adhere to the development path of leading industrial development and product innovation.

                      Company                                                                        Office                                                                 Showroom

                 Workshop                                                                    Workshop                                                           Workshop  

                   Workshop                                                                 Workshop                                                             Workshop 

     

    FAQ

     

    1. why should you buy from us not from other suppliers?
    10 Years’ experience, more than 200 employees and 44000 square CHINAMFG factory, 3000 square CHINAMFG showroom and office. * Quality: ISO9001, ISO14001, CE certificate, Intertek, EN15534 Test Reports * Capacity: more than 400*40HQ containers of furniture capability per year.

    2.How long for making a sample and mass production ?
    7-10days for basic samples, 35-45days for mass production.

    3. Could you provide free sample ?
    Yes, free sample will provided based on basic and exist items, but under freight-collect.

    4. How can you ensure the quality inspection?
    we have the inspection standard before delivery , and supply you picture.

    5. Can you accept OEM or ODM?
    Yes, of course. And customized Logo acceptable.

    6. What’s your main payment?
    All the payment term is accepted, such as T/T, L/C, D/P, Paypal, West Union and so on.

    Material: Aluminum Alloy
    Type: Double
    Style: Modern
    Samples:
    US$ 50/Piece
    1 Piece(Min.Order)

    |

    Order Sample
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.





    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    oudoor furniture

    What are the best practices for storing aluminum chairs during the winter months?

    When it comes to storing aluminum chairs during the winter months, it’s important to follow certain best practices to protect them from potential damage caused by cold temperatures, moisture, and harsh weather conditions. Here are some recommended practices for storing aluminum chairs during winter:

    1. Clean and Dry:

    Before storing your aluminum chairs, make sure to clean them thoroughly. Remove any dirt, debris, or stains using a mild soap and water solution. Allow the chairs to dry completely before proceeding with the storage process. Moisture can lead to corrosion or mold growth, so it’s crucial to ensure the chairs are fully dry.

    2. Disassemble if Necessary:

    If your aluminum chairs have removable parts or cushions, consider disassembling them before storage. This will help save space and prevent any damage during the storage period. Keep all the components organized and labeled to easily reassemble the chairs when the warmer season arrives.

    3. Choose a Suitable Storage Location:

    Find a dry and well-ventilated storage location for your aluminum chairs. Ideally, an indoor storage area such as a garage, basement, or shed is preferred. If indoor storage is not possible, consider using weatherproof covers or placing the chairs under a sturdy, waterproof tarp to protect them from direct exposure to rain, snow, and extreme weather conditions.

    4. Elevate and Protect:

    Avoid storing aluminum chairs directly on the ground, especially if the storage area is prone to moisture. Place the chairs on elevated surfaces such as wooden pallets, shelves, or storage racks. This helps promote air circulation and prevents moisture accumulation. Additionally, consider using furniture covers or blankets to provide an extra layer of protection against dust and potential scratches.

    5. Avoid Stacking:

    Stacking aluminum chairs during storage can lead to dents, scratches, or damage to the finish. If you need to conserve space, consider using chair storage racks or investing in stackable chairs specifically designed for efficient storage. If stacking is unavoidable, place protective padding or towels between the chairs to minimize contact and reduce the risk of damage.

    6. Regular Inspection:

    Periodically inspect your stored aluminum chairs throughout the winter months. Check for signs of moisture, mold, or pest infestation. If any issues are detected, address them promptly to prevent further damage. Additionally, ensure that the storage area remains dry and well-maintained to preserve the condition of the chairs.

    By following these best practices, you can help ensure that your aluminum chairs remain in good condition during the winter months and are ready to be enjoyed again when the warmer weather returns.

    oudoor furniture

    Can I find information on the environmental impact of aluminum chair production?

    Yes, you can find information on the environmental impact of aluminum chair production. The production of aluminum chairs involves several stages, from extracting raw materials to manufacturing and distribution. Each stage can have environmental implications. Here are some factors to consider:

    1. Raw Material Extraction:

    Aluminum is derived from bauxite ore, and the extraction process can have environmental impacts. Mining bauxite can lead to deforestation, habitat disruption, and soil erosion. However, aluminum is a highly recyclable material, and using recycled aluminum can significantly reduce the environmental impact associated with raw material extraction.

    2. Energy Consumption:

    The production of aluminum requires a substantial amount of energy, particularly in the smelting process. Energy-intensive processes, such as electrolysis, are used to extract aluminum from alumina. The source of energy used for aluminum production can impact its environmental footprint. Using renewable energy sources or improving energy efficiency in manufacturing can help reduce the greenhouse gas emissions associated with aluminum chair production.

    3. Chemical Usage:

    Chemicals are often used in the manufacturing process of aluminum chairs, such as coatings, finishes, and adhesives. Some of these chemicals can have environmental implications, particularly if they contain hazardous substances. Environmentally conscious manufacturers may opt for eco-friendly coatings and finishes or implement proper waste management practices to minimize chemical pollution.

    4. Transportation and Packaging:

    The transportation of raw materials, components, and finished aluminum chairs can contribute to the environmental impact. Long-distance transportation using fossil fuel-powered vehicles emits greenhouse gases. Packaging materials, such as plastic or excessive packaging, can also generate waste. Opting for local suppliers and utilizing eco-friendly packaging materials can help reduce the carbon footprint and waste associated with transportation and packaging.

    When seeking information on the environmental impact of aluminum chair production, you can consider the following sources:

    – Manufacturer Websites: Many responsible manufacturers provide information on their sustainability practices and environmental initiatives on their websites. Look for sections specifically addressing environmental impact, sustainability, or corporate social responsibility.

    – Industry Certifications: Some certifications, such as the Forest Stewardship Council (FSC) or the Sustainable Furnishings Council (SFC), assess the environmental performance of furniture manufacturers. They may provide information on the sustainability aspects of aluminum chair production.

    – Environmental Reports: Research reports, articles, or studies conducted by environmental organizations, research institutions, or government agencies may provide insights into the environmental impact of aluminum production as a whole or the furniture industry in general.

    By exploring these sources, you can gain valuable information about the environmental impact of aluminum chair production and make informed choices when selecting environmentally friendly options.

    oudoor furniture

    Where can I find information on cleaning and maintaining aluminum chairs for longevity?

    If you’re looking for information on cleaning and maintaining aluminum chairs to ensure their longevity, there are several sources where you can find valuable guidance. Here are some avenues to explore:

    1. Manufacturer’s Instructions:

    The manufacturer of your aluminum chairs is often the best source of information on cleaning and maintenance. Check the product packaging or the manufacturer’s website for any specific instructions or recommendations they provide. They may offer guidelines on the appropriate cleaning products to use, recommended cleaning frequency, and any precautions to take to prolong the lifespan of your chairs.

    2. Online Resources:

    There are numerous online resources that provide comprehensive guides on cleaning and maintaining aluminum furniture. Look for reputable websites that specialize in outdoor furniture care or general household maintenance. These resources often outline step-by-step cleaning procedures, tips on removing stains or grime, and suggestions for protecting aluminum chairs from environmental factors such as sun exposure or moisture.

    3. Home and Garden Magazines:

    Home and garden magazines frequently feature articles on outdoor furniture care and maintenance. Browse through these publications, either in print or online, to find expert advice and tips on cleaning and maintaining aluminum chairs. These articles may include specific product recommendations or techniques to keep your chairs looking their best.

    4. Video Tutorials:

    Video tutorials on platforms like YouTube can be a helpful resource for visual demonstrations of cleaning and maintenance techniques for aluminum chairs. Many content creators share their expertise and provide step-by-step instructions on how to clean, polish, and protect aluminum furniture. Watching these tutorials can give you a better understanding of the process and help you learn useful tips and tricks.

    5. Local Retailers:

    Visit local retailers that specialize in outdoor furniture and inquire about cleaning and maintenance recommendations for aluminum chairs. The staff may be knowledgeable about the specific products or techniques that work well for aluminum furniture in your region. They can provide you with advice tailored to your local climate and environmental conditions.

    When cleaning and maintaining aluminum chairs, it’s important to follow the instructions provided and use appropriate cleaning products and tools. Avoid using abrasive materials or harsh chemicals that can damage the finish or surface of the chairs. Regular cleaning and proactive maintenance, such as applying protective coatings or storing the chairs properly during harsh weather, can significantly extend the lifespan of your aluminum chairs.

    By consulting these various sources, you can find reliable information and expert tips on cleaning and maintaining aluminum chairs, ensuring that they remain in excellent condition and last for many years to come.

    editor by CX 2023-10-20